Index · Правила · Поиск· Группы · Регистрация · Личные сообщения· Вход

Список разделов Объявления и реклама
 
 
 

Раздел: Объявления и реклама [Продам] Жесткие диски 

Создана: 20 Ноября 2017 Пон 15:15:30.
Раздел: "Объявления и реклама"
Сообщений в теме: 1, просмотров: 226

  1. 20 Ноября 2017 Пон 15:15:30
    - HDD Hitachi Deskstar 7K1000 250Gb 2шт - 1100 р. (каждый).
    S.M.A.R.T. log
    smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build)
    Copyright (C) 2002-12 by Bruce Allen, [внешняя ссылка]

    === START OF INFORMATION SECTION ===
    Model Family: Hitachi Deskstar 7K1000.C
    Device Model: Hitachi HDS721025CLA382
    Serial Number: JP0240HL3TYJPH
    LU WWN Device Id: 5 000cca 35af59e4d
    Firmware Version: JP1OA3MA
    User Capacity: 250,059,350,016 bytes [250 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: ATA-8-ACS revision 4
    Local Time is: Wed Apr 26 09:39:31 2017 UTC
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x80) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 2190) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 37) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
    2 Throughput_Performance 0x0005 138 138 054 Pre-fail Offline - 86
    3 Spin_Up_Time 0x0007 119 119 024 Pre-fail Always - 192 (Average 193)
    4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2145
    5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
    7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0005 138 138 020 Pre-fail Offline - 31
    9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 15686
    10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2073
    192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2149
    193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 2149
    194 Temperature_Celsius 0x0002 230 230 000 Old_age Always - 26 (Min/Max 20/56)
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

    SMART Error Log Version: 0
    No Errors Logged

    SMART Self-test log structure revision number 1
    No self-tests have been logged. [To run self-tests, use: smartctl -t]


    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build)
    Copyright (C) 2002-12 by Bruce Allen, [внешняя ссылка]

    === START OF INFORMATION SECTION ===
    Model Family: Hitachi Deskstar 7K1000.C
    Device Model: Hitachi HDS721025CLA382
    Serial Number: JPE370HY1D4X0P
    LU WWN Device Id: 5 000cca 370d39e5d
    Firmware Version: JP1OA3MA
    User Capacity: 250,055,122,432 bytes [250 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: ATA-8-ACS revision 4
    Local Time is: Wed Apr 26 09:38:44 2017 UTC
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x84) Offline data collection activity
    was suspended by an interrupting command from host.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 2410) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 40) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
    2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 97
    3 Spin_Up_Time 0x0007 117 117 024 Pre-fail Always - 195 (Average 197)
    4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1771
    5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
    7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0005 136 136 020 Pre-fail Offline - 32
    9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 10604
    10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1605
    192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1782
    193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1782
    194 Temperature_Celsius 0x0002 222 222 000 Old_age Always - 27 (Min/Max 13/65)
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 147

    SMART Error Log Version: 0
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed without error 00% 6738 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    - HDD WD Caviar Blue 320Gb - 1400р.
    S.M.A.R.T. log
    smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build)
    Copyright (C) 2002-12 by Bruce Allen, [внешняя ссылка]

    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Caviar Blue Serial ATA
    Device Model: WDC WD3200AAJS-00L7A0
    Serial Number: WD-WCAV2J102311
    LU WWN Device Id: 5 0014ee 157c8d359
    Firmware Version: 01.03E01
    User Capacity: 320,071,851,520 bytes [320 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: Exact ATA specification draft version not indicated
    Local Time is: Wed Apr 26 09:40:24 2017 UTC
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x84) Offline data collection activity
    was suspended by an interrupting command from host.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 6000) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 73) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x3037) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0027 174 129 021 Pre-fail Always - 2291
    4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1566
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 1
    9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21483
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1535
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 128
    193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1566
    194 Temperature_Celsius 0x0022 115 098 000 Old_age Always - 28
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    No self-tests have been logged. [To run self-tests, use: smartctl -t]


    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    - HDD Seagate Barracuda 7200.10 750Gb - 1500р.
    S.M.A.R.T. log
    smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build)
    Copyright (C) 2002-12 by Bruce Allen, [внешняя ссылка]

    === START OF INFORMATION SECTION ===
    Model Family: Seagate Barracuda 7200.10
    Device Model: ST3750640AS
    Serial Number: 5QD2L24B
    Firmware Version: 3.AAE
    User Capacity: 750,156,374,016 bytes [750 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 7
    ATA Standard is: Exact ATA specification draft version not indicated
    Local Time is: Wed Apr 26 09:41:13 2017 UTC
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    See vendor-specific Attribute list for marginal Attributes.

    General SMART Values:
    Offline data collection status: (0x82) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 430) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 202) minutes.

    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000f 111 079 006 Pre-fail Always - 33176475
    3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
    4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 107
    5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
    7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 167878186
    9 Power_On_Hours 0x0032 056 056 000 Old_age Always - 39024
    10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 129
    187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
    189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
    190 Airflow_Temperature_Cel 0x0022 068 043 045 Old_age Always In_the_past 32 (Min/Max 32/32)
    194 Temperature_Celsius 0x0022 032 057 000 Old_age Always - 32 (0 20 0 0 0)
    195 Hardware_ECC_Recovered 0x001a 115 052 000 Old_age Always - 194038836
    197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
    202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed without error 00% 39024 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    Контакт личка, +7 (9I3) 975-59-8l
 
 
 
Рейтинг@Mail.ru